The motors and drives company Nordic Drives Group has acquired 100% of Fabrika A/S. The acquisition supports the goal of being the leading partner for […]

Introduction to the most powerful electric motor configuration software – the Siemens DT Configurator! Choosing the right electric motor for your application in order to […]

ATEX motors for hazardous areas Fabrika’s line of explosion protected ATEX motors intended for use in potentially explosive atmospheres comprises motors for all zones; 1, […]

Cooling types of electric motors Cooling of an electric motor is the transmission of the losses that occur in the motor and turn into heat […]

Types of construction of electric motors When chosing the right electric motor for the application, the mounting form needs to be considered. The mounting form […]

This you should know regarding new standards for IE classes for electric motors as of 1st July 2023 As of 1st July 2023, the requirements […]

The successful collaboration between Fabrika Special Motors, a daughter company of Fabrika, and Multi-Wing Group has led to an acquisition of Fabrik Special Motors by […]

Overload factor If a “service factor” is specified on a Fabrika or Siemens motor rating plate, this means that the motor can be continuously operated […]

Ambient temperature All Siemens and Fabrika non-ATEX motors in the standard version can be used in ambient temperatures between -20 °C and +40 °C and […]

Duty cycles of electric motors The relative duty cycle (previously called ON time) is the percentage of the time with constant load with respect to […]